Permanent ground anchors
Permanent ground anchors are defined as those which must guarantee a design life of more than two years.
The minimum corrosion protection surrounding the tendons of the anchor shall be a single continuous layer of corrosion preventive material which does not degrade during the design life of the anchor.
The tendons of a permanent ground anchor shall be provided with either:
The minimum corrosion protection surrounding the tendons of the anchor shall be a single continuous layer of corrosion preventive material which does not degrade during the design life of the anchor.
The tendons of a permanent ground anchor shall be provided with either:
- two protective barriers to corrosion such that if one barrier is damaged during the installation or anchor loading, the second remains intact,
- a single protective barrier to corrosion , the integrity of which shall be proven by testing each anchor in situ,
- a corrosion protection system provided by a steel duct tube-a-manchette type anchor,
- a corrosion protection system provided by a corrugated plastic duct tube-a-manchette type anchor,
- a corrosion protection system provided by a steel duct compression tube type anchor
Ground anchor TPE-02
TPE-02 permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011 and Italian Standards.
The TPE-02 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-02 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
The TPE-02 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-02 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
Ground anchor TPE-02SP
TPE-02SP permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011 and Italian Standards.
The TPE-02SP ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-02SP ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
The TPE-02SP ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-02SP ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
Ground anchor TPE-03
TPE-03 permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011 and Italian Standards.
The TPE-03 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-03 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
The TPE-03 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-03 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
Ground anchor TPE-08
TPE-08 permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011 and Italian Standards.
The TPE-08 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-08 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
The TPE-08 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPE-08 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
Ground anchor TPE-13
TPE-13 permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011 and Italian Standards.
The TPE-13 anchor has a special DDDK sheath to allow applications at high hydrostatic pressures.
The TPE-13 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
The TPE-13 anchor has a special DDDK sheath to allow applications at high hydrostatic pressures.
The TPE-13 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
Ground anchor TPH5
TPH5 permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011 and Italian Standards.
The TPH5 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPH5 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).
The TPH5 ground anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground needs permanent anchors to be installed.
The TPH5 ground anchors are defined permanent as their expected design life is over two years (EN 1537-2013).