Equipment
All equipment is made in full respect of the Standard, therefore equipped with user manuals and maintenance, metal plate reporting the identification of the machine and the serial number.
All the machines are provided with on board electrical protections and are supplied as follows: 3 poles plus earth 3P+T with supply at 380 Volt. 50Hz. and 16, 32 and 63 Amp supply base on the machine absorption.
Where a direction of rotation must be observed, machines are provided with a change-over switch to allow the phase inversion automatically without any manual intervention on the circuit.
All the hydraulic circuits are provided with safety valves to limit overpressure or mistakes in the operation of regulation valves. A metallic label identifies the machine and its part number.
All the machines are provided with operating and maintenance manuals and with the CE marking upon request.
Our equipment’s:
JACKS, available in different versions
HYDRAULIC PUMP, used for stressing operations
GROUTING PUMP, equipped with two tanks for the dough colloidal and as a reservoir
STRAND FORCING MACHINE, of different versions, that allows the insertion of the strand in to the sheath
All equipment is made in full respect of the Standard, therefore equipped with user manuals and maintenance, metal plate reporting the identification of the machine and the serial number.
All the machines are provided with on board electrical protections and are supplied as follows: 3 poles plus earth 3P+T with supply at 380 Volt. 50Hz. and 16, 32 and 63 Amp supply base on the machine absorption.
Where a direction of rotation must be observed, machines are provided with a change-over switch to allow the phase inversion automatically without any manual intervention on the circuit.
All the hydraulic circuits are provided with safety valves to limit overpressure or mistakes in the operation of regulation valves. A metallic label identifies the machine and its part number.
All the machines are provided with operating and maintenance manuals and with the CE marking upon request.
Our equipment’s:
JACKS, available in different versions
HYDRAULIC PUMP, used for stressing operations
GROUTING PUMP, equipped with two tanks for the dough colloidal and as a reservoir
STRAND FORCING MACHINE, of different versions, that allows the insertion of the strand in to the sheath
Hydraulic Pump
The Hydraulic Pump are used for the operations of tensioning providing pressure to the various types of jacks, mono and multi strand. Using a manifold all the pumps can be connected to more than one tensioning jacks, obtaining up to 10 outputs hydraulic in iso-pressure.
Read More
Grouting Pump
The T Grouting pump is designed to guarantee maximum versatility with regard to site requirements and use in severe conditions.
Read More
Strand Forcing Machine
The T Grouting pump is available in two different models, T61 and TMS-4.
The two machines are connected hydraulically with flexible tubes and allow the insertion of the strands into the sheaths automatically managing the parameters of length, speed and applied force.
Read More
The two machines are connected hydraulically with flexible tubes and allow the insertion of the strands into the sheaths automatically managing the parameters of length, speed and applied force.